MY24 RR 480 4T EFI

Description

The BETA MY24 RR 480 4T EFI best expresses itself in wide open spaces. Its characteristics are similar to the 430 model but with even greater torque and power, suitable for more expert and physically fit riders.

The updates introduced for the MY 2024 RR range are summed up below:

• New seat: the foam making up the seat has a different geometry and density to provide greater rider comfort. The greater support area and different composition of the materials now provide the rider with a much more comfortable point of contact with the bike.
• Suspension: in addition to the continuous refinement of the suspension setup, the MY24 bikes feature lighter upper fork tubes, particularly in the area of engagement of the lower fork sliders. The different machining of the tubes is designed to provide controlled flexibility, which results in smoother damping of rough terrain and therefore significantly improved comfort and sensitivity.
• New radiators: new lighter and tougher radiators, featuring shaped reservoirs in the upper section in order to allow the bike to achieve a greater steering angle. The new radiators, which provide better coolant circulation for improved vehicle cooling, feature a greater number of reinforcements, and are also equipped with a new non-plastic cap which is tougher and less exposed to potential impacts.
• Brakes: the front braking system has received upgrades to the brake line. The line’s protective sheath is now fastened with dual crimping (at the top and bottom, previously it was only crimped at the bottom), allowing the brake line protection to better withstand the continuous stresses it is subjected to.
• New graphics: the MY24 range does a U-turn on the simple, essential look which marked the previous bike. The completely new graphics have an aggressive, geometric, and modern look, achieved thanks to skilful use of the classic red, white, and black colours typical of this model, integrating perfectly with frame and plastics in the characteristic Beta red.
• Traction control: the traction control system has been further refined by the Betamotor technicians. Through improved mapping, the system is now more precise in its operation, mitigating unwanted or overly invasive intervention.
• Airbox: the airbox sleeve has had its geometry overhauled, and with it the airflow to the engine, to offer greater performance at medium to high engine speeds, while maintaining the torque at low speeds which was obtained with the introduction of the current exhaust manifold. This innovation now allows for ‘full-blooded’ power delivery along the entire curve.ADR and LAMS compliant in all Australian states and territories.

SPECIFICATIONS